- Contact Person : Ms. xia Denise
- Company Name : Changzhou Guoda Bearing Manufacturing Co., Ltd.
- Tel : 0086-519-86709002-8019
- Fax : 0086-519-86701905
- Address : Jiangsu,Changzhou,Yinjiatang Industrial Zone Banshang Lijia Changzhou Jiangsu China
- Country/Region : China
- Zip : 213165
Drawn cup needle bearings
1) The outer ring with large load carrying capacity of drawn cup needle roller bearing is formed by punching the thin steel plate. It is suitable for small section height, or when the housing bore isn’t used for raceway, this type is recommended to use .The bearing is assembled into the housing bore under a certain pressure without further axial orientation.
Usually this type needn’t use inner ring, but if needed,you can obtain some information from this catalogue.
In contract to the drawn cup needle roller bearing with open end, the searing with one closed end has good sealing properties .Unsealed drawn cup needle roller bearing is available for temperature between 20 and +120°Cwith high quality lithium base grease.
2.Inspection
The dimensional accuracy of drawn cup needle roller bearings can’t be measured before fitting, as the thin walled outer ring will be out of round during manufacturing process.
The bearings obtain the accuracy only when pressed into a housing bore with the recommended tolerance limits.
The inscribed circle’s diameter (FW) can be checked as follows;
Press the bearing into a normal ring and inspect the minimum deviation of inner diameter with cylindrical limiting gauge.
GD also manufatures other inch series, such as SCE ,SCH, BCH, B. If needing,please contact GD sales office for availability.
Drawn cup needle bearings
